| Part and Material List | |||
|---|---|---|---|
| 01 | Body | Carbon Steel | ASTM A216 WCB |
| 02 | Body Seat Ring | Carbon Steel | ASTM A105 ST'L No. 6 Face |
| 03 | Wedge | Carbon Steel | ASTM A216 WCB 13Cr Face |
| 04 | Stem | Stainless Steel | ASTM A182 F6a |
| 05 | Gasket | Stainless Steel + Graphite | ASTM A 182 316 + Graphite |
| 06 | Bonnet | Carbon Steel | ASTM A216 WCB |
| 07 | Bonnet Bolt | Carbon Steel | ASTM A193 B7 |
| 08 | Boonet Nut | Carbon Steel | ASTM A194 2H |
| 09 | Back Seat Ring | Stainless Steel | ASTM A276 410 |
| 10 | Packing Ring | Graphite | Die Formed / Braided Graphite |
| 11 | Hinge Pin | Carbon Steel | - |
| 12 | Gland Bolt | Carbon Steel | ASTM A193 B7 |
| 13 | Packing Gland | Stainless Steel | ASTM A276 410 |
| 14 | Gland Flange | Carbon Steel | ASTM A216 WCB |
| 15 | Gland Nut | Carbon Steel | ASTm A194 2H |
| 16 | Grease Nipple | Stainless Steel | 2 1/2" and Above |
| 17 | Yoke Sleeve | Ductile Iron | ASTM A439 D2 |
| 18 | Yoke Cap | Carbon Steel | - |
| 19 | Handwheel | Ductlie Iron | - |
| 20 | Handwheel Nut | Carbon Steel | - |
| 21 | Set Screw | Steel | - |
| 22 | Nameplate | Stainless Steel | ASTM A182 F316 |
Other End connections are available on request.
Option available for materials to meet NACE MR0175 requirement
| Dimensional Data (mm)* | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2" | 371.0 | 47.5 | 215.0 | 165.1 | 124.0 | 95.3 | 38.1 | 7.9 | 8-25.4 | 300 | 614/524 | 19.1 | 95.0 |
| 3" | 472.9 | 69.9 | 265.0 | 203.2 | 168.1 | 136.5 | 47.8 | 7.9 | 8-32.0 | 350 | 681/565 | 23.8 | 168.0 |
| 4" | 549.1 | 91.9 | 310.0 | 241.3 | 193.5 | 161.9 | 53.8 | 7.9 | 8-35.0 | 400 | 702/582 | 28.5 | 277.0 |
| 6" | 711.2 | 136.4 | 395.0 | 317.5 | 247.7 | 211.1 | 82.6 | 9.5 | 12-39.0 | 640 | 951/775 | 38.1 | 545.0 |
| 8" | 841.5 | 177.8 | 485.0 | 393.7 | 317.5 | 269.9 | 91.9 | 11.1 | 12-45.0 | 710 | 1137/913 | 47.8 | 1180.0 |
| 10" | 1000.3 | 222.3 | 585.0 | 482.6 | 371.3 | 323.9 | 108.0 | 11.1 | 12-51.0 | 750 | 1437/1170 | 57.1 | 2118.0 |
